The outlets are on the wall, behind the desk, near the floor. Your laptop charger, phone and lamp are on top of the desk. That gap is why cords end up draped over the back edge, and why plugging anything in means crawling underneath.
Bringing an outlet up to the desktop fixes it. There are three ways to do that, and the right one mostly depends on whether you're willing to cut a hole in your desk.
The three options
Grommet outletSits in a 2-inch hole in the desktop. The cleanest lookView on Amazon- Clamp-on power stripClamps to the desk edge. No drillingSearch Amazon
Power strip under the deskNothing on the desktop, and every plug out of sightView on Amazon
Option 1: a grommet outlet
A grommet outlet is a small round power strip that drops into a hole in the desktop. The outlet and USB ports sit on top, the cord hangs underneath, and from above it looks like part of the desk. It's the same hole and the same hole saw you'd use for an ordinary cable grommet, so if you're already cutting one to pass cords through, this is very little extra work.
Desk grommet with power outlet
Desktop Power Grommet,2inch Hole Table Power Grommet Outlet with 2 USB Charging Ports,6.5ft Extension Cord Desk Power Strip with 1 Outlets for Computer,Table, Kitchen, Office,Home,Hotel and More
One outlet and two USB charging ports on a 6.5-foot cord. It fits a hole between 2 and 2.4 inches across.
You need a drill and a hole saw of the right size. This is the kit I bought. It has the 2-inch saw this grommet needs.
The kit I bought
SUNGATOR Hole Saw Kit, 7-Piece Circle Hole Cutter with 4 Pcs Saw Blades in 1-1/4", 1-1/2", 2", and 2-1/8" Inch, 1 Mandrel, 1 Drill Bit, Carbon Steel Circle Cutter for Wood, Plastic, PVC and Drywall
Four saw sizes for wood, plastic and drywall. It cuts about an inch deep.
How to install it
- Pick the spot. A back corner works best: out of the way of your arms and close to where chargers already sit. Check that the cord will reach your power strip or wall outlet from there.
- Look underneath. Make sure the hole won't land on a frame rail, a drawer runner or a crossbar, and that there's room below for the body of the grommet and its cord. On a standing desk, stay clear of the lifting frame.
- Check what the desk is made of. Solid wood, plywood, MDF and particleboard all cut fine. Don't try this on glass or metal. Many budget desktops are hollow, a thin skin over a paper core. They can be cut, but tighten the grommet gently so it doesn't crush the skin. For a solid hardwood top such as oak or maple, the kit above isn't the right tool (its maker says it's for softer wood), so use a bi-metal hole saw instead.
- Mark and tape. Mark the center of the hole and cover the area with painter's tape. The tape helps stop a laminate or veneer surface from chipping.
- Cut from the top, then finish from below. Drill until the pilot bit just comes through the underside, then stop. Move under the desk, put the pilot bit in that small hole and finish the cut from there. Cutting from both sides leaves a clean edge on both faces. It's also how you get through a desktop thicker than the saw is deep.
- Fit the grommet. Vacuum up the dust, feed the plug and cord down through the hole, seat the grommet and screw it tight the way its instructions show.
- Tidy the cord. Run it along the underside of the desk to your power strip with a few stick-on clips.
Use a drill with decent power, and let the saw do the cutting instead of leaning on it. I started on a thick, sturdy desk with a weak drill and it was unpleasant.
Pro tip: if you also fit an ordinary cable grommet and it sits loose in its hole, wrap electrical tape around it until it's snug.
Option 2: a clamp-on power strip
If you rent, have a glass or metal desk, or just don't want a hole in a desktop you like, a clamp-on power strip gets you most of the way there. It grips the edge of the desk the way a monitor arm does and puts a row of outlets and USB ports at the back or side of the desktop.
Check three things before you order one:
- Desk thickness. Every clamp has a range it fits. Measure your desktop at the edge and compare.
- What's under the edge. A frame rail or lip right below the desktop edge can stop the clamp from closing.
- The gap behind the desk. The clamp needs a little room, so a desk pushed tight against the wall has to come forward slightly, or the strip has to go on a side edge.
On a glass top, read the maker's guidance first. Some clamps aren't meant for glass.
Option 3: a power strip under the desk
The third way is to leave the desktop alone and move the power strip from the floor to the underside of the desk. This is how my own desk is set up. Nothing shows on top, every plug is hidden, and only one cord runs down to the wall. A strip with mounting tabs screws straight to the underside. If you'd rather not use screws, it can sit in a cable tray. The details are in how to mount a power strip under your desk.
I use the older model
TROND Surge Protector Power Strip 5ft Cord, 4000J, 4 USB, ETL Listed, Black | 13 Widely-Spaced Outlets Expansion with USB C Ports, Low-Profile Flat Plug, Wall Mount, Extension Cord, 14AWG Heavy Duty
13 widely spaced outlets, 4 USB ports, a flat plug and four mounting tabs.
The trade-off is reach. This is ideal for things that stay plugged in, like monitors, a dock and a printer. For the things you plug in and unplug every day, pair it with something on the desktop. I use a charging station for phones, tablets and a watch, which covers nearly everything I'd otherwise reach under the desk for.
The one I use
SooPii 60W 6-Port Charging Station for Multiple Devices With 6 Short Cables | PD 20W USB C Charging Station, Multi Devices Organizer with 2 in 1 Holder for lPhone,iPad,Tablets and Others,White
Charges six devices at once and comes with six short cables.
Which one should you pick?
- You're happy to drill, and want it to look built in: the grommet outlet.
- No holes, or the desk is glass or metal: the clamp-on strip.
- You want a clear desktop above all: the strip underneath, plus a charging station for daily devices.
- A standing desk: any of the three works, because all of them move with the desktop. Leave enough slack in the one cord that goes to the wall for the desk's full height.
They also combine well. A strip under the desk for everything that stays plugged in and a grommet outlet on top for a laptop charger is a tidy setup.
A few safety notes
- Desk outlets are for desk things: chargers, a laptop, a lamp, monitors. Keep space heaters and other heavy loads on a wall outlet.
- Check the rating printed on whatever you buy and stay under it. The grommet above is rated for 12 amps.
- Don't plug one power strip into another.
- Keep cords clear of anything that moves or pinches: drawer runners, chair wheels and the frame of a standing desk.
Once the power is sorted
With an outlet where you need it, the rest of the cords get much easier to deal with. My desk cable management guide goes through the whole desk in eight steps. If drilling is off the table, cable management without drilling covers the stick-on and clamp-on options.




